How to Change Golf Club Grips: A Step-by-Step Guide

So, you’ve been swinging away on the golf course, but lately, you’ve noticed that your grips are starting to look a little worn and tired. Well, fear not, because it’s time to take matters into your own hands and change those golf club grips! Don’t worry, you don’t need to be a professional to do it – with a few simple steps, you’ll have your clubs feeling brand new again.

In this step-by-step guide, we’ll walk you through the process of changing your golf club grips, from gathering the necessary tools and supplies, to removing the old grips, cleaning the club shafts, and installing the new grips. Get ready to give your clubs a fresh new grip that will have you swinging with confidence on the green.

Let’s get started!

Replace golf grips with Lamkin to improve today

Related Video: "Replace golf grips with Lamkin to improve today" by Golf Tips

Key Takeaways

  • Golf club grips can be easily changed with a few simple steps.
  • Choosing the right grip size is important for optimal swing and shot accuracy.
  • Different types of golf club grips are available: rubber, corded, or hybrid grips.

– Necessary tools and supplies include grip solvent, double-sided grip tape, a hook blade or utility knife, and a vice or grip clamp.

Gather the Necessary Tools and Supplies

Now that you know what you need, it’s time to gather up your tools and supplies to give those golf club grips a much-needed makeover.

The first step is choosing the right grip size. This is crucial because the grip size affects your swing and shot accuracy. Measure your hand size and refer to a grip sizing chart to determine the appropriate size.

Once you have the right size, you can move on to exploring the different types of golf club grips available. There are various options such as rubber, corded, or hybrid grips, each with its own benefits and drawbacks. Consider factors like weather conditions, personal preference, and grip durability when making your choice.

As you gather your tools and supplies, keep in mind that you’ll need grip solvent, double-sided grip tape, a hook blade or utility knife, and a vice or grip clamp. With these essentials in hand, you’ll be well-prepared to remove the old grips and get started on your grip replacement journey.

Remove the Old Grips

Begin by carefully peeling off the worn-out grips, like shedding a second skin, revealing the bare handle beneath. Removing the old grips can be a tricky task, but with the right tips and tricks, you can ensure a smooth grip removal process.

To make the job easier, it’s important to have the necessary tools ready, such as a grip solvent, a utility knife, and a grip tape.

Start by spraying the grip solvent into the space between the grip and the shaft. This’ll help loosen the adhesive and make it easier to remove the grip. Take the utility knife and carefully cut through the grip lengthwise, making sure not to damage the shaft. Once the grip is cut, peel it off slowly, working your way from the top to the bottom. Be patient and gentle to avoid any unnecessary damage.

When removing the old grips, it’s important to avoid some common mistakes. One common mistake is using excessive force, which can lead to bending or even breaking the shaft. Another mistake is cutting too deeply with the utility knife, causing damage to the shaft underneath. Take your time and be cautious throughout the process.

Once you’ve successfully removed the old grips, it’s time to move on to the next step: cleaning the club shafts.

Clean the Club Shafts

After successfully removing the old grips, it’s time to give those club shafts a sparkling makeover. Cleaning the club shafts is an important step in the process of changing golf club grips, as it helps maintain the cleanliness of the new grips and ensures optimal performance on the course. When cleaning the club shafts, there are a few key points to keep in mind.

Firstly, it’s crucial to choose the right grip size for your clubs. The grip size affects your swing and can greatly impact your performance. A grip that is too small may cause your hands to overwork, leading to inconsistent shots, while a grip that is too large can result in a lack of control. To determine the correct grip size, measure your hand size and refer to a grip sizing chart.

Next, make sure to maintain the cleanliness of the club grips. Over time, dirt, sweat, and oils can accumulate on the grips, affecting your grip and control. To clean the grips, use a mild soap or grip cleaner and a soft cloth. Gently scrub the grips to remove any dirt or grime, and rinse them thoroughly with water. Dry the grips completely before moving on to the next step.

After cleaning the club shafts, you’re now ready to apply grip tape and grip solvent. This will be covered in the next section, so let’s move on.


Clean the Club Shafts
– Choose the right grip size
– Maintain cleanliness of the club grips


Apply Grip Tape and Grip Solvent

To enhance the performance of your golf swing, it’s essential to apply grip tape and grip solvent to the club shafts. Choosing the right grip size for your golf clubs is crucial as it directly affects your control and comfort during the swing.

Grip tape provides a secure and durable bond between the grip and the club shaft. It acts as an adhesive layer, preventing the grip from slipping during your swing. When applying grip tape, make sure to clean the club shaft thoroughly to remove any dirt or residue. Start by wrapping the tape tightly around the shaft, starting from the butt end and working towards the clubhead. Smooth out any wrinkles or air bubbles as you go along.

Grip solvent is used to activate the adhesive on the grip tape, allowing for easy installation of the new grips. It helps lubricate the tape, making it easier to slide the grip onto the club shaft. Apply the grip solvent generously to the inside of the grip and the exposed tape on the club shaft.

Now that you’ve applied the grip tape and grip solvent, you’re ready to move on to the next step: installing the new grips.

Install the New Grips

Once you’ve successfully applied the grip tape and grip solvent, it’s time to expertly install the new grips onto your club shafts, ensuring a firm and comfortable hold for your golf swing.

To begin, make sure you have all the necessary tools, including the new grips, double-sided grip tape, grip solvent, and a rubber vise clamp.

Start by removing the protective backing from the grip tape and carefully align it with the bottom of the grip. Slowly wrap the tape around the shaft, ensuring there are no wrinkles or gaps.

Once the tape is in place, pour a small amount of grip solvent inside the grip and shake it to evenly distribute the solvent.

Next, quickly slide the grip onto the shaft, making sure it lines up with the clubface. It’s important to work swiftly to prevent the solvent from drying too quickly.

Once the grip is in position, use the rubber vise clamp to secure the club, ensuring the grip is fully seated.

If you encounter any problems during the installation process, such as the grip not sliding on smoothly, try applying more grip solvent or adjusting the position of the grip tape. If the grip feels loose, add more grip solvent and reposition the grip to create a tighter fit.

By following these installation tips and troubleshooting common grip installation problems, you’ll be able to confidently change your golf club grips and improve your golf game.

Frequently Asked Questions

How often should I change my golf club grips?

You might think golf club grips can last forever, but they wear out over time. To maintain your performance and prevent slippage, it’s recommended to change your golf club grips every 1-2 years or when you notice signs of wear like cracks and loss of tackiness.

Can I reuse the grip tape when changing golf club grips?

Yes, you can reuse grip tape when changing golf club grips. However, there are alternative grip removal methods such as using a grip solvent or air compressor that can make the process easier and more efficient.

Is it necessary to clean the club shafts before applying the new grip?

Cleaning the club shafts before applying new grips is crucial for maintaining a proper grip. Did you know that a study found that 80% of golfers who regularly clean their club shafts experience improved control and accuracy in their swings?

Can I use regular household cleaning products to clean the club shafts?

To clean the club shafts, it is recommended to use specific cleaning products designed for golf clubs. Regular household cleaning products may be too harsh and damage the club. Look for cleaning solutions specifically made for golf clubs for the best results.

How long does it take for the grip solvent to dry before I can use my golf clubs again?

The drying time for grip solvent varies, but it typically takes around 24 hours before you can use your golf clubs again. Alternatively, you can use other grip drying methods like using a hairdryer or leaving them in a well-ventilated area.

HomeGolf ClubsHow to Change Golf Club Grips: A Step-by-Step Guide
Editorial Team
Editorial Team
SabieGolf Editorial Team is a passionate group of golf enthusiasts dedicated to providing you with the ultimate golf guides for players of all levels.
Newsletter Form

Join Our Newsletter

Signup to get the latest news, best deals and exclusive offers. No spam.

Latest Posts
Related Posts